LG AN160 - Manual (Page 22)

Getting Started with Your Phone
Ge
tting S
tar
ted
with
Your Phone
20
Notice
Please make sure that the 'B' side
faces up before inserting a charger
or USB cable into the Micro USB
Charging Port of your phone.
Plug one end of the charging
adapter into the phone’s Micro
USB Charging Port and the other
end into an electrical outlet.
The charge time varies
depending upon the battery level.
Battery Charge Level
The battery charge level is shown
at the top right corner of the
LCD screen. When the battery
charge level becomes low, the
low battery sensor alerts you in
up to three ways: sounding an
audible tone, blinking the battery
icon, and displaying a warning
message. If the battery charge
level becomes exceedingly low,
the phone automatically switches
off and any function in progress
is not saved.
Turning the Phone On and
Off
Turning the Phone On
1. Install a charged battery or
connect the phone to an
external power source if the
battery level is low.
2. Press for about 2
seconds until the LCD screen
lights up.
Turning the Phone Off
Press and hold until the LCD
screen turns off.
Signal Strength
Call quality depends on the signal
strength in your area. The signal
strength is indicated on the
screen as the number of bars
next to the signal strength icon
-- the more bars, the better
the signal strength. If the signal
quality is poor, move to an open
area. If you are in a building, the
reception may be better near a
window.
Note
The call quality may also be affected
by the places where you are and
weather/ambient conditions.