LG AN160 - Manual (Page 65)

Settings
63
Se
ttings
2. Read the displayed message
and press to continue.
3. Use to highlight TTY Full/
TTY + Talk/ TTY + Hear/ TTY
Off, then press
.
5. System
The System menu allows you
to designate specific system
network settings.
5.1 Network
5.1.1 System Select
Allows you to set up the phone
producer’s management
environment. Leave this setting
as the default unless you want
to alter system selection as
instructed by your service
provider.
1. Press , , , , .
2. Use to highlight
Home Only/ Automatic, then
press
.
5.1.2 Set NAM
Allows you to select the phone’s
NAM (Number Assignment
Module) if the phone is
registered with multiple service
providers.
1. Press , , , , .
2. Use to highlight NAM1 or
NAM2, then press .
5.1.3 Serving System
Identifies the serving system
Channel Number and SID
Number. This information should
only be used for technical
support.
1. Press , , , , .
5.2 Location
Allows you to turn On or Off the
Location function on your phone.
If set to On, location-based
services are able to access your
GPS (Global Positioning System)
satellite-assisted location
information.
Note
GPS satellite signals are not always
transmitted, especially under bad
atmospheric and environmental
conditions, indoors etc.
1. Press , , , .
2. Use to highlight
Location On/ E911 Only, then
press
.