Cycle option buttons – LG DLE2701V User Manual

Page 31

Advertising
background image

RACk DRY

Use RACK DRY with items, such as

wool sweaters, silk, and lingerie, that

should dry flat. RACK DRY can also be

used with items that should not be tumbled dry,

such as gym shoes or stuffed animals.
NOTE: NEVER use the rack with a tumble

dry cycle.

DAmP DRY BEEP

With this option, the dryer will beep

when the load is approximately 80%

dry. This allows you to remove

faster-drying lightweight items or items that you

would like to iron or hang while still slightly damp.

WRINkLE CARE

Selecting this option will tumble the

load periodically for up to 3 hours after

the selected cycle, or until the door

is opened. This is helpful in preventing wrinkles

when you are unable to immediately remove

items from the dryer.

CYCLE OPTION BUTTONS

Your dryer features several additional cycle

options to customize cycles to meet your

individual needs. Certain option buttons also

feature a special function (see the following page

for details) that can be activated by pressing and

holding that option button for 3 seconds.

To Add Cycle Options to a Cycle:

Turn on the dryer and turn the cycle selector

knob to select the desired cycle.

Use the cycle settings buttons to adjust the

settings for that cycle.

Press the cycle option button(s) for the

option you would like to add. A confirmation

message will be shown in the display.

Press the START/PAUSE button to start the

cycle. The dryer will start automatically.

1

2

3

4

1

Make sure it is seated evenly on the edge

of the inner door rim and resting flat on the

inside of the dryer.
NOTE: Be sure to remove the drying rack

after using the RACK DRY cycle.

2

To Install the Drying Rack

With the dryer door open, slide the rack into

the dryer drum.

31

Advertising