LG G4011GO - Manual (Page 12)

21 20
Getting Started Getting Started
Installing the SIM Card
When you subscribe to a cellular network, you are provided with a
plug-in SIM card loaded with your subscription details (PIN,
optional services available and so on).
Locate the SIM card socket in the back of the phone. Follow the
steps below to install the SIM card.
1. Remove the battery if attached.
2. Slide the SIM card into the SIM card holder so that the holder
locks the card in position.
Notice When you need to remove the SIM card, slide it towards the
top of the phone and take it out of the holder.
Notice
] Before installing always make sure that the phone is switched off
and remove the battery.
] The metal contact of the SIM card can be easily damaged by
scratches. Pay special attention to the SIM card while handling and
installing. Follow the instructions supplied with the SIM card.
Turning Your Phone On and Off
Turning Your Phone On
1. Install a charged battery pack or connect the phone to an
external power source such as the vehicle power adapter or car
kit.
2. Press for more than five seconds.
Notice
] The battery delivered with your phone has to be fully charged
before using it.
] Do not remove the battery or the SIM card while charging.
] If your phone is powered on while charging, you’ll see the bars in
the battery indicator icon cycle.
When the battery is fully charged, the bars in the battery indicator
icon will flash on and off
] If your phone is powered off, the display will show the charging
status. ‘Charging’ or ‘Full’ will be displayed.
If the battery fails to charge completely:
] After turning the phone on and off, please attempt to recharge the
battery.
] After detaching and reattaching the battery, please attempt to
recharge the battery.
Full Charging
SIM
SIM