LG L200ME-BF - Manual (Page 5)

4
Connecting the Display
Before setting up the monitor, ensure that the power to the monitor, the computer
system, and other attached devices is turned off.
Connecting the stand base or Removing the stand base
1.
Place the monitor with its front facing downward on a cushion or soft cloth.
2.
Rotate the Stand Body as shown in figure . 1
3.
Align the hooks on the stand base with the matching slots in the base of the monitor.
4.
Insert the hooks into slots.
1
Slot
Stand Body Hook
Warning
The tape and locking pin may only be removed from those monitors equipped
with a standing base when the base is pulled up.
Otherwise, you may be injured by the protruding sections of the stand.
Stand Base