LG 60PA6500 - Manual (Page 16)

16
ENG
ENGLISH
ASSEMBLING AND PREPARING
Tidying cables
1 Install the power cord holder and power cord.
It will help prevent the power cable from being
removed by accident.
Power cord holder
2 Gather and bind the cables with the cable
holder.
Cable holder
CAUTION
y y Do not move the TV by holding the cable
holder and power cord holder, as the cable
holders may break, and injuries and damage
to the TV may occur.
Attaching the protection cover
1 Remove the stand before installing the TV
on a wall mount by performing the stand
attachment in reverse.
After removing the stand, push the supplied
protection cover into the opening at the bottom
of the TV until it locks in place.
This will protect the opening from accumulating
dust and dirt.
Protection cover
2 Secure the TV and the protection cover with
the 2 screws.
M4 x 30
2 EA
CAUTION
y y Make sure that the screws are fastened
completely. (If they are not fastened
securely enough, the TV may tilt forward
after being installed.)
y y Do not fasten the screws with too much
force; otherwise they may be worn out
and get loosened.