LG G4050 - Manual (Page 34)

65
Settings
Security Settings Menu 4.5
Various codes and passwords are used to protect the features of
your phone. They are described in the following sections (see
pages 22~23)
PIN Code Request (Menu 4.5.1)
When the PIN code request feature is enabled, you must enter your
PIN each time you switch the phone on. Consequently, any person
who does not have your PIN cannot use your phone without your
approval.
The following options are available:
• Enable: You must enter the PIN each time the phone is switched
on.
• Disable: The phone connects directly to the network when you
switch it on.
Call Barring Service (Menu 4.5.2)
Call barring allows you to restrict from making and receiving calls
with your phone. For this function, you need the barring password,
which you can obtain from your service provider.
The following options are available:
] All outgoing: Calls cannot be made.
] Outgoing international: International calls cannot be made.
] Outgoing international except home country: When
abroad, calls can be made only to numbers within the current
country and to your home country, which is where your home
network provider is located.
] All incoming: Calls cannot be received.
] Incoming when abroad: Calls cannot be received when you
are using your phone outside your home service area.
Note Before disabling the PIN code request feature, you must enter
your PIN
64
Settings
Auto Redial (Menu 4.4.7)
Select On, and your phone will make a maximum of three attempts
to connect the call after an unsuccessful call attempt.
Select Line (Menu 4.4.8)
This setting is shown only if the SIM card supports two subscriber
numbers, that is, two phone lines. Select which phone line (Line 1
or Line 2) you want to use for making calls and sending short
messages. Calls on both lines can be answered irrespective of the
selected line.
Closed User Group (Menu 4.4.9)
Closed user group is a network service that specifies the group of
people whom you can call and who can call you. For more
information contact your network operator or service provider. If a
group index is specified, it is used for all outgoing calls. If no group
index is specified, the network will use the preferential index
(a specific index that is stored in the network).
] Preset: Setting the selected CUG Index.
] On: Activating and editing the CUG Index.
] Off: Deleting the selected CUG.
Note You will not be able to make calls if you select Line 2 and
have not sbscribed to this network service.
*
*
*
* : Shown only if supported by SIM card