Removing the battery, Charging with usb, Battery temperature protection – LG LGVN360 User Manual

Page 14: Battery charge level, Signal strength, Powering your phone on/off, Removing the battery · · · · · · · · · · · · · 12, Battery temperature protection · · · · 12, Powering your phone on/off · · · · · · · · 12, Getting started with your phone

Advertising
background image

Getting Started with Your Phone

12

Removing the Battery

1. Turn the phone off.

2. Use the fingertip cutout at the

bottom of the phone to pull the
back cover off.

3. Use the fingertip opening

near the bottom of the battery
compartment to lift the battery
out.

Charging with USB

You can use your computer to
charge your phone. To be able to
charge with the USB cable, you
may need to have the necessary
USB Driver installed on your PC
first. Connect one end of the USB
cable to the Accessory/Charger
Port on your phone and the other
end to the USB port on your PC.

NOTE

Low-power USB ports are not

supported, such as the USB ports on
your keyboard or bus-powered USB hub.

Battery Temperature Protection

If the battery gets overheated, the
phone will automatically turn off.
When you turn the phone back on,
a message pops up alerting you
that the phone was powered off for
your safety.

Battery Charge Level

You can find the battery charge
level

at the top right corner of

the LCD screen. When the charge
level becomes low, the battery
sensor sounds a warning tone,
blinks the battery icon, and/or
displays a warning message. As the
charge level approaches empty, the
phone automatically switches off
without saving.

Signal Strength

Call quality depends on the signal
strength in your area. You can tell
how much signal strength you have
by the number of bars next to the
signal strength icon

: the more

bars, the stronger the signal. If
you’re having problems with signal
quality, move to an open area or,
when inside a building, try moving
near a window.

Powering your phone on/off

Press and hold the PWR/
END Key until the screen
lights up.

Press and hold the PWR/
END Key until the display
turns off.

Advertising
This manual is related to the following products: