LG LGD851TN - Manual (Page 84)

83
NOTE:
•
Access to the Internet and a wireless router required. As an added
convenience, T-Mobile has shipped certain smartphones with Wi-Fi
enabled as a default setting. Leaving Wi-Fi enabled when not connected
to a Wi-Fi network may affect battery charge. Qualifying data plan
required.
•
This device supports WEP, WPA/WPA2-PSK and 802.1x EAP. (Some
EAP methods are not supported.) If your Wi-Fi service provider or network
administrator sets encryption for network security, enter the key in the pop-up
window. If encryption is not set, this pop-up window will not be shown. You can
obtain the key from your Wi-Fi service provider or network administrator.
Bluetooth
Bluetooth is a short-range communications technology that allows you to
connect wirelessly to a number of Bluetooth devices, such as headsets and
hands-free car kits, and Bluetooth-enabled handhelds, computers, printers,
and wireless devices. The Bluetooth communication range is usually up to
approximately 30 feet.
Turn on Bluetooth
From the Home screen, tap > > Settings > Networks tab, then tap the
Bluetooth switch to turn on the Bluetooth functionality.
To make your phone visible to other devices
1 From the Home screen, tap > > Settings > Networks tab >
Bluetooth.
2 Make sure Bluetooth is turned on.
3 Tap the checkbox next to the device name. Visibility is set to 2 minutes by
default.
NOTE: To change the visibility time length, tap the Menu icon > Visibility
timeout. Choose from 2 min, 5 min, 1 h, or Never time out.