LG 50LA6970 - Manual (Page 16)

ENGLISH
16 ASSEMBLING AND PREPARING
Securing the TV to a wall (optional)
(Depending on model)
1 Insert and tighten the eye-bolts, or TV brackets and
bolts on the back of the TV.
- If there are bolts inserted at the eye-bolts position,
remove the bolts first.
2 Mount the wall brackets with the bolts to the wall.
Match the location of the wall bracket and the eye-
bolts on the rear of the TV.
3 Connect the eye-bolts and wall brackets tightly with
a sturdy rope or cable.
Make sure to keep the rope or cable parallel to the
flat surface.
y y Make sure that children do not climb on or hang on
the TV.
CAUTION
y y Use a platform or cabinet that is strong and large
enough to support the TV securely.
y y Brackets, bolts and ropes are optional. You can
obtain additional accessories from your local dealer.
NOTE
Using the Kensington security system (optional)
(Depending on model)
The Kensington security system connector is located at
the rear of the TV.
For more information of installation and using, refer
to the manual provided with the Kensington security
system or visit http://www.kensington.com.
Connect the Kensington security system cable between
the TV and a table.
y y The Kensington security system is optional. You
can obtain additional accessories from your local
dealer.
NOTE
Tidying cables
1 Gather and bind the cables with the cable
management.
2 Gather and bind the cables with the cable holder.
Cable Holder
Cable Management
y y Do not move the TV by holding the cable holder
and cable management, as the cable holders may
break, and injuries and damage to the TV may
occur.
CAUTION