LG BX286 - Manual (Page 46)

6
English
Appendices
Problem: Image is unstable or flickering
 Adjust the “Total Dots” or “Fine Sync” to correct it. Refer to the
“SETTING|signal” section for more information.
 Change the monitor color setting from your computer.
 Check and reconfigure the display mode of your graphic card to
make it compatible with the product.
Problem: Image is out of focus
 Adjust the focus ing on the projector lens.
 Make sure the projection screen is between the required distance
1.3 to 32.8 feet (0.4 to 10.0 meters) from the projector (refer to
page 19).
Problem: The image is stretched when displaying 16:9 DVD
The projector automatically detects 16:9 DVD and adjusts the aspect
ratio by digitizing to full screen with 4:3 default setting.
If the image is still stretched, you will also need to adjust the aspect
ratio by referring to the following:
 Please select 4:3 aspect ratio type on your DVD player if you are
playing a 16:9 DVD.

If you can’t select 4:3 aspect ratio type on your DVD player,
please select 4:3 aspect ratio in the on screen menu.
Problem: Image is too small or too large
 Move the projector closer to or further from the screen.
 Press “MENU” button on the remote control or projector panel,
go to “SCREEN --> Aspect Ratio” and try the different settings.
Problem: Image is reversed
 Select “SETTING -->Mounting” from the OSD and adjust the
projection direction.