American Dryer Corp. ADG-464 - Manual (Page 23)

19
D. EXTERNAL SUPPLY CONNECTIONS
1. Optional Sprinkler Water Supply
A 40 PSI (2.75 bar) supply of water must be connected into the 1” N.P.T. sprinkler connection located on
the left side of the tumbler (basket) base on dryer models with a sprinkler system.
2. Compressed Air Supply
A minimum of 20 cubic feet per hour (cfh) (.566 cu. m./hr) at 80 PSI (5.51 bar) of dry, clean and regulated
compressed air must be supplied to the dryer.
The compressed air supply must be connected into the 3/8” F.P.T. fitting which is located in the rear corner
of the lower heat console section.