LG M5201C-BA - Manual (Page 6)

5
Select an input signal.
Press the INPUT button on the remote control to select the input signal.
Or, press the SOURCE button on the bottom of the product.
INPUT SET
• How to connect to two computers.
Connect the signal cables (
HDMI to DVI and D-Sub) to each computer.
Press the INPUT button on the remote control to select the computer to use.
• Directly connect to a grounded power outlet on the wall or a power bar with a ground
wire.
Note
Turn on power by pressing the power button on the product.
Turn on the PC.
ON/OFF AUTO/SET SOURCE
Power button
Input Input SOURCE AUTO/SET
When connecting with a D-Sub signal input cable.
• Select RGB : 15-pin D-Sub analog signal.
When connecting with a HDMI to DVI signal input cable.
• Select HDMI/DVI : HDMI to DVI Digital signal.
B
A
Connecting to External Devices
2
1