Magic remote control functions – LG 55EA8800 User Manual

Page 28

Advertising
background image

ENGLISH

28

MAGIC REMOTE CONTROL FUNCTIONS

MAGIC REMOTE CONTROL FUNCTIONS

When the message “Magic remote control battery is low. Change the battery.” is displayed, replace the
battery. To replace batteries, open the battery cover, replace batteries (1.5 V AA) matching and ends to
the label inside the compartment, and close the battery cover.
Failure to match the correct polarities of the battery may cause the battery to burst or leak, resulting in fire,
personal injury, or ambient pollution.
Be sure to point the remote control at the remote control sensor on the TV. To remove the batteries, perform
the installation actions in reverse.

y

y

Do not mix old and new batteries, as this may damage the remote control.

CAUTION

This remote uses infrared light. When in use, it should be pointed in the direction of the TV’s remote sensor.

(POWER)

Turns the TV on or off.

BACK

Returns to the previous level.

Voice recognition

- This is a beta version and only available in

selected functions for supported models.

- Network connection is required to use the

voice recognition function.

1. Press the Voice recognition button.

2. Speak slowly and precisely.

When a voice is recognized, the processing

message appears on the screen.

y

y

Use the magic remote control no further

than 10 cm (4 inches) from your face.

VOL

Adjusts the volume level.

Used for viewing 3D video.

(MUTE)

Mutes all sounds.

SMART
Accesses the Smart Home.

(LIGHTING ON/OFF)

Turns the light on and off.
If you set it to ON, the light automatically turns
off in 5 seconds

Navigation buttons
(up/down/left/right)
Scrolls through menus or options.

CH

Scrolls through the saved channels.

/Q.MENU
Accesses the quick menus.
Accesses the Universtal Control.
(Depending upon country)

Wheel (OK)

Selects menus or options and confirms your
input. Scrolls through the saved programmes.
If you press the navigation button while
moving the pointer on the screen, the pointer
disappears, and the Magic Remote Control
works as a regular remote control.
To display the pointer again, shake the Magic
Remote Control from side to side.

Pointer (RF transmitter)

Advertising