LG GU295 - Manual (Page 88)

Settings
84
- 4 Matches: The four most likely matched
names will be displayed when finding a
name from the address book.
• Sensitivity: Choose between High, Medium,
and Low.
• Speakerphone Mode
- Automatic On: When this option is
selected, sound is loud enough so you can
hear the output when the phone is away
from the ear, at a distance.
- Off: When this option is selected, sound
is quieter and cannot be heard when the
phone is away from the ear, at a distance.
• Call Alert
- Ring Only: The phone rings repeatedly
during an incoming call.
- Ring After Name: The phone announces
the name and number of the incoming
call, then rings repeatedly.
- Name Repeat: The phone announces an
incoming call by repeating the name or
number of the caller.
Software Update
If new software exists, the AT&T server notifies
devices using a push message.
The user can also check for the software
update using the menu “Check for Update”.
If the new software does not exist the user can
not use this feature in 24 hours.
Before updating new software after
downloading it from the AT&T server, users can
decide whether they would like to postpone
the operation. Reminder times can be set to
30 minutes, 1 hour, and 4 hours. When the
time is up, users are prompted again or users
can resume the postponed operation using this
menu at any time.
The software update can only be postponed
three times and will automatically start after
the third postpone period expires.
To access Software Update, from the standby
screen, press the left soft key
Menu,
Settings, and Software Update.