LG DX630-JD - Manual (Page 19)

Function
19
Function
Video Menu Options
* In this manual, the OSD(On Screen Display) may be different from your Projector’s because it is just an example to
help with the Projector operation.
* This operating guide explains operation of RGB(PC) mode mainly.
1. Press the MENU button and then use , button to select the menu.
2. Press the , button to select a video item you want to adjust.
3. Press the , button to adjust the screen condition as you want.
< RGB mode >
< Video mode >
● Each adjustment of menu options will not affect other inputs.
As required, re-adjust menu options for the input sources.
● To restore the original image condition after changing it, press OK button
after selecting [Reset] item.
● When receiving an NTSC signal, the picture item Tint is displayed and can
be adjusted.(60Hz only)
● You can adjust contrast by pressing the button on the remote control.
● You can adjust brightness by pressing the button on the remote control.
● Press the MENU button twice or the EXIT button to exit the menu screen.
Adjusting Video
1. Press the MODE button on the remote control.
2. Press the , button to adjust the screen condition as you want.
Picture mode
* Use Picture mode function to set the projector for the best picture appearance.
* This function does not work in RGB or HDMI mode.
● Each press of the , button changes the screen as shown below.
● You can use this function through the MENU button.
● To exit the menu display, press the EXIT button.
Picture mode
Contrast 80
Brightness 50
Color 50
Sharpness 50
Tint 0 Clear
Contrast 50
Brightness 50
Color R 50
Color G 50
Color B 50
Reset
MENU Exit Move OK
MENU Exit Move OK
Clear Soft User