LG LGBP6100 User Manual
Page 72
BP6100
71
Data/Fax (Menu
)
Allows you to use your phone to transmit data and faxes.
1.
Press , , , .
2.
Use
to select a setting, then press
.
Off / Fax In Once / Fax In Always / Data In Once / Data
In Always
N
NO
OT
TE
E
The Data Connection Kit allows you to connect your
PC or PDA to your LG wireless phone, freeing you
from having to locate a telephone outlet. You can
send or receive an e-mail, a fax, or access the
Internet anytime, anywhere.
PC Connection (Menu
)
Allows you to set the data port and port speed. Set the port
speed based on your carrier’s network. Contact your carrier to
determine the maximum available speed.
1.
Press , , , .
2.
Use
to select a setting, then press
.
USB / RS-232C(COM Port) / Closed
N
NO
OT
TE
E
When using 1X HSPD data service via an RS-
232C data cable, the port speed is set to 115,200
(230,400 is not supported). When using 1X HSPD
data service via a USB data cable, you may get
better port speed if the port speed is set to
230,400 rather than 115,200.
Mode(1X/QNC) (Menu
)
This is setting enables you to set the speed for WAP, BREW
and Tethered Mode.
1.
Press , , , .
2.
Use
to select a setting, then press
.
Auto / 1X / QNC
N
NO
OT
TE
E
When flip is closed, you can press
(Voice
Dial Key) for three seconds to set Driving Mode.
PAP ID (Menu
)
It is the user’s ID for PPP Authentication Protocol.
1.
Press , , , .
2.
Enter a PAP ID and press
.
Settings