LG LSX300-4DM - Manual (Page 4)

a POWER indicator
Lights up red (standby mode) or blue
(active mode). This indicator will blink
when remote signal is received.
b Remote Control Sensor
Receives signals from the Remote
Control.
c u/U (Channel Down/Up)
Scans up or down through memo-
rized channels.
d POWER
Turns the unit on or off.
a From Antenna
Connect to digital signal source;
over-the-air antenna.
b To TV (RF)
Connect to a TV with RF coaxial
inputs.
c VIDEO and AUDIO OUTPUT
(Left/Right)
Connect to a TV/Monitor with Video
and audio inputs.
d AC Power Cord
Plug into the power source.
Introduction
4
Front Panel
Connection Panel Overview
a b c d
a b c d
If you have a universal remote control, you may
control this unit using it.
To program the remote control to control this
unit, set the remote control’s operation mode to
TV or Settop Box, and set your remote control to
the manufacturer codes of LG or Zenith.
Note
LSX300-4DM_ENG 1/24/08 8:56 AM Page 4