LG L1718S-BN - Manual (Page 8)

A7
2
1
Connecting the Display
1.
Place the monitor in a convenient, well-ventilated location near your computer.
2.
Connect the signal cable. When attached, tighten the thumbscrews to secure the
connection.
3.
Connect the power cord into a proper power outlet that is easily accessible and close to
the display.
Wall-outlet type
PC-outlet type
MAC
Power Cord Signal Cable
Varies according to model.
1
2
Mac adapter
For Apple Macintosh use, a separate plug adapter is needed to change
the 15 pin high density (3 row) D-sub VGA connector on the supplied
cable to a 15 pin 2 row connector.
4.
Press button on the side switch panel to turn the power on.
When monitor power is turned on, the 'Self Image Setting
Function' is executed automatically.
(Analog Mode Only)
NOTE
The 'Self Image Setting Function' provides the user with optimal display settings. When the user connects the
monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals.
If you want to adjust the monitor while in use, or wish to manually run this function once again, push the ‘AUTO/SET’
button on the side panel of the monitor. Otherwise, you may execute the ‘ Factory reset’ option on the OSD
adjustment menu. However, be aware that this option initializes all the menu items except ‘Language’.
NOTE
This is a simplified representation
of the rear view.
This rear view represents a
general model; your display may
differ from the view as shown.
PC
PC