LG AN-WL100W - Manual (Page 10)

10
PrEPArATiON
PR
EP
AR
AT
IO
N
■ The IR blaster allows the LG TV to control external equipment, like a cable box.
Connect the provided IR Blaster cable to the
IR Blaster terminal on the Wireless Media Box.
1
After removing the protection paper from the
IR Blaster cable, adhere it to the external
equipment as shown.
2
1 2
DC IN 12V OPTICAL DIGITAL
AUDIO OUT SERVICE ONLY
3
RGB IN(PC)
AUDIO IN
RGB/DVI SERVICE ONLY
A
B
COMPONENT / AV IN 1
COMPONENT / AV IN 2
A
R L(MONO) AUDIO VIDEO
B
R L(MONO) AUDIO VIDEO
IR BLASTER
L R L R
/ DVI IN
NOTE
►When you attach the IR Blaster sensor near the remote control sensor of the external device, the
signal can be detected more efficiently.
IR Receiver
1 2
DC IN 12V OPTICAL DIGITAL AUDIO OUT SERVICE ONLY
3
RGB IN(PC)
AUDIO IN
RGB/DVI SERVICE ONLY
A
B
COMPONENT / AV IN 1
COMPONENT / AV IN 2
A
R L(MONO) AUDIO VIDEO
B
R L(MONO) AUDIO VIDEO
IR BLASTER
L R L R
/ DVI IN
Install the external device with the IR Blaster
installed at a location it is not affected by the sig-
nal from the remote controller to the TV.
When the external device with the IR Blaster
installed receives the signal from the remote con-
troller simultaneously with the TV, it may not
operate.
Body of external
device with IR
Blaster installed
NOTE
►For some external devices, the IR Blaster may not operate depending on the performance of the
IR receiver.
►The operation may be delayed due to the sensitivity of the wireless signal.
ATTAChiNg ThE ir BlASTEr
OPTimAl lOCATiON OF ExTErNAl dEViCE WiTh ir
BlASTEr iNSTAllEd