Adjusting the stand height – LG 29EA93-P User Manual
Page 12
Advertising
12
ENG
ENGLISH
ASSEMBLING AND PREPARING
Once the pin is removed, it is not necessary
to re-insert it to adjust the height.
Adjusting the stand height
2
Remove
the
tape
attached at the bottom rear
of the stand body, then pull out the locking
pin
.
4
The height can be adjusted up to 110.0 mm.
Do not put your fingers or
hand between the screen
and the base (chassis) when
adjusting the screen's height.
Tape
Locking Pin
Stand Body
CAUTION
WARNING
110.0 mm
3
Push
the
Head
downward and pull out the
Locking Pin
.
Head
Locking pin
1
Place the monitor mounted on the stand base
in an upright position.
29EB93
Advertising