LG HECTO - Manual (Page 22)

22 PREPARATION
Installation
Installation Precautions
• Place the product in a well-ventilated
environment.
- To prevent the internal heat from
building up, install the Laser TV in a
well-ventilated place.
Do not place anything near the
Laser TV. That may block its air
vents. If the air vents are blocked,
the internal temperature will
increase.
- Do not place the Laser TV on a
carpet or rug. If a product has its
inlet vent on its bottom, do not block
the vent and use the product on a
leveled solid surface.
- Be sure to prevent foreign objects,
such as scraps of paper, from
entering the inlet vent.
- Leave enough distance (30 cm or
more) around the vent of the Laser
TV.
• Do not place the product in a hot or
humid environment.
- Do not place the product in a hot,
cold, or humid environment.
• Do not place the product in a dusty
place.
- This may cause fire.
• Never open any cover on the product.
There is a high risk of electric shock.
• The Laser TV is manufactured using
high-precision technology. You may,
however, see tiny black dots and/or
bright spots that continuously appear
on the screen. This is a normal result
of the manufacturing process and
does not indicate a malfunction.
• The remote control may not work
in an environment where a lamp
equipped with electronic ballasts or
a three-wavelength fluorescent lamp
is installed. Replace the lamp with an
international standard lamp for the
remote control to work normally.
• Do not open or press the electric door
or by force.
- This may cause product
malfunction.