LG ND3520 - Manual (Page 13)

Operating 13
Oper
ating
2
y If this unit displays an error message “ERR”,
below reasons may have caused an error.
- Your iPod/iPhone is not connected firmly.
- This unit recognizes your iPod/iPhone as
an unknown device.
- Your iPod/iPhone is exceptionally low in
power.
/ The battery needs to be charged.
/ If you charge the battery while iPod/
iPhone is extremely low in power, it
may take longer to be charged.
y Depending on your iPod/ iPhone ’s software
version, it may not be possible to control
your iPod/iPhone from this unit. We
recommend installing the latest software
version.
y If you use an application, make a call, or
send and receive SMS text message, etc. on
iPod touch or iPhone, disconnect it from
iPod/iPhone dock of this unit and then use
it.
y If you have a problem with your iPod/
iPhone, please visit www.apple.com/
support.
y In standby mode, you can charge your iPod/
iPhone by connecting it to iPod/iPhone
Dock.
y You may need additional operation for iPod
touch or iPhone, for example “unlock” by
draging the slider.
,
Note
USB Operation
1. Connect the USB device to the USB port.
2. Select the USB function by pressing
PFUNCTION or F.
Removing the USB Device from the unit.
1. Choose a different function/mode.
2. Remove the USB device from the unit.
,
Note
To Do this
Play Press .
Pause During playback, press .
Skipping to
the next/
previous file
During playback, press / to
go to the next file or to return to
the beginning of the current file.
During playback, Press
twice
briefly to step back to the previous
file.
Searching
for a section
within a file
Press and hold / during
playback and release it at the point
you want to listen to.
ND3520-NM.BUSALLK_1755_ENG.indd 13 2012-09-05 2:34:45