LG 55LW9800 - Manual (Page 51)

ENTERTAINMENT 51
WPS (Wi-Fi Protected Setup)
If your router or AP has a WPS button, it is the
easiest connection method. You simply press the
button on the router and then select the WPS on
the TV within 120 seconds.
1 Repeat step 1-7 on “Connecting to a wireless
network”.
2 Press the Navigation buttons to select the
Simple setting (WPS-button mode).
3 Press the WPS button on your router.
4 Go back to the TV and select Connect.
5 Repeat step 6-7 on “Connecting to a wired
network”.
Ad-hoc Mode
Ad-hoc mode allows the TV to use a wireless to
connect to a computer without using a router or
access point.
1 Repeat step 1-5 on “Connecting to a wireless
network”.
2 Press the Navigation buttons to select Setting
Ad-hoc network and press ENTER.
3 Press the Navigation buttons to select Enter and
press ENTER.
4 Press ENTER to select Connect to connect
Adhoc network.
- You can see the Network ID and Security Key
on your TV screen.
- Enter this Network ID and Security Key to your
device.
- When needed, you can change the setting
information using the Red button.
NOTE
When searching for wireless networks on
your PC using ad-hoc, the TV is named
LGTV10.
• LGTV10 that appears in the list. (Select
the same name as the network ID that
appears on your TV screen.)
5 Press the Navigation buttons to type in an IP
address and press ENTER.
Option Description
PC Setting
• Internet Protocol(TCP/IP) of PC
needs to be set manually. IP
address, Subnet Mask, and
default Gateway can be set
with your own discretion.
» e.g.) IP address: 192.168.0.1
/ Subnet Mask:
255.255.255.0 / default
Gateway: 192.168.0.10
TV Setting
• Verify IP address and gateway
of PC. Input Gateway address
of PC to IP Address, and IP
Address of PC to Gateway, and
select Enter.
» e.g.) IP address:
192.168.0.10 / Subnet Mask:
255.255.255.0 / default
Gateway: 192.168.0.1
6 Press the Navigation buttons to select Close
after Network setting is completed.
7 Press the ENTER.
ENGLISH