LG NB3520A - Manual (Page 12)

Connecting 12
C
onnecting
2
Setting up
Pairing wireless subwoofer
LED indicator of wireless subwoofer
LED Color Status
Blue or yellow The wireless subwoofer is
receiving the signal of the unit.
Blue or yellow
(blink) The wireless subwoofer is trying
to connect.
Red The Wireless subwoofer is in
standby mode.
Off (No
display) The power cord of wireless
subwoofer is disconnected.
Setting up the wireless subwoofer
for the first time
1. Connect the power cord of the Wireless
subwoofer to the outlet.
2. Turn on the main unit : The main unit and
wireless subwoofer will be automatically
connected.
Manually pairing wireless subwoofer
When your connection is not completed, you can
see the red LED on the woofer and woofer is not
made sound. To solve the problem, follow the
below steps.
1. Press and hold I STOP button on the unit
and MUTE button on the remote control
simultaneously.
- Displays the “REMATE”.
2. Press PAIRING on back of the woofer.
- The blue or yellow LED will flicker
3. Turn off and on the unit.
- If you see “blue or yellow” LED, it’ s successful.
4. If you don’t see “blue or yellow” LED, try again
Step 1 - Step 3.
y If you operate main unit then wireless
subwoofer sound within a few seconds in
standby mode.
y Set the distance between this unit and
wireless subwoofer within 10 m (32 ft.).
y Optimum performance can be
implemented only when the unit and
the Wireless subwoofer within distance
of 2 m (6 ft.) to 10 m (32 ft.) is used since
communication failure may occur if longer
distance is used.
y It takes a few seconds (and may take longer)
for the unit and subwoofer to communicate
with each other.
,
Note