LG 32LB9D - Manual (Page 20)

PREP
AR
A
TION
18
PREPARATION
SWIVEL STAND
(Only 50PY3D/F, 60PY3D/F)
After installing the TV, you can adjust the the TV set manually to the left or right direction by 20 degrees to
suit your viewing position.
NOTE
G G Before adjusting the angle, you must remove
the cable management and loosen (to the
left) the shaft bolt on the middle of stand’s
back. And when stand be level with TV, you
must close (to the right) the shaft bolt to
set the hole.
NOT USING THE DESK-TYPE STAND
(Only 50PY3D/F, 60PY3D/F)
When not using the desk-type stand, install the
supplied desk-type stand fixture protection rubber
caps as shown at the figure.
To prevent the foreign materials from entering the
desk-type stand fixture, fix the desk-type stand fix-
ture protection cover(additional cover) by using
the supplied bolts as shown at the figure.
ADDITIONAL COVER
BOLT
RUBBER
■ It is applied to when installing only the 60PY3D/F model as wall-type.
■ It is applied to when installing only the 50PY3D/F, 60PY3D/F models as wall-type.