LG NC1000 - Manual (Page 10)

7
Composition of SuperSign
Connect using D-SUB input cable (Check monitor RGB input)
LINE-OUT Cable should be connected for Audio output during D-SUB connection
Power Cable
RS-232C Cable
Provided RS-232C cable is to connect the SuperSign to the monitor.
HDMI Cable (Check monitor HDMI input)
* When connecting a HDMI device
1) Connection for audio output is not necessary as HDMI terminal outputs both audio and video.
2) Select Start > Control Panel > Sounds and Audio Devices > Audio.
3) Select Sound playback > NVIDIA High Definition Audio, then click on ‘OK’ button.
*When Removing a HDMI device
1) Select Start > Control Panel > Sounds and Audio Devices > Audio.
2) Select Sound playback > Realtek HD Audio output, then click on ‘OK’ button.
3) Sound is not output if speaker is not set as default after removing the HDMI cable.
4) Programs currently running have to be closed and restarted for sound to be output normally.
LINE-OUT Cable
LAN Cable
Cable connection procedure of the product
A
B
C
D
E
F
Please set the SET ID of the display connected Player to 1.
Display Device whitch does not use LG RS23C Protocol can not be controlled and monitored
on SuperSign Manager NOTE
* After switching on the power switch and pushing the SuperSign power button, light of the SuperSign
power button turns to green and the power is on.
D-SUB Cable
HDMI Cable
Power Cable
RS-232C Cable
LINE-OUT Cable
LAN Cable
Using D-SUB: A, B, C, E, F
Using HDMI: B, C, D, F
1
2
3 4