LG AN-MR300 - Manual (Page 5)

5
installing RF Dongle
Image shown may differ from your TV.
1 Locate the designated Velcro attachment location on the
TV. Then tear off the protection paper and attach the Velcro.
(The attachment location is different depending on the TV
model you own)
2 Connect the RF Dongle Cable plug on the RF Dongle to a
USB or USB Apps jack on the TV.
3 Attach the RF Dongle to the velcro as shown below and
then turn on the TV.
4 Make sure that your TV is turned on and then register the
Magic Remote Control with your TV after 20 seconds.
* If the RF Dongle for the wireless media box is attached,
attach the RF Dongle for the Magic remote control on the
below right of the back of the TV.
* To avoid wireless interference, keep the distance between
the Wi-Fi dongle and the remote RF dongle over 20 cm.
RF Specification
The Magic remote control communicates with the RF Dongle
using a Bluetooth Version 3.0 .
ꔛ Output Power (Max.) : 10 dBm or lower
ꔛ Maximum Communication Distance :
Line of Open Sight approx. 10 m (30 ft)
ꔛ Frequency Range : 2.400 GHz - 2.4835 GHz
ꔛ Data Rate (Max.) : 3 Mbps
installing Batteries
ꔛ To replace batteries, open the battery cover, replace
Alkaline batteries (1.5 V AA) matching and ends to the
label inside the compartment, and close the battery cover.
Don’t mix old or used batteries with new ones.
to use the pattern gesture function
Press the Wheel (OK) with the normal video screen on and
draw a pattern toward the screen.
Previous channel : Moves back to the previous channel.
Recent list : Shows channels recently watched.
* Gestures may not work when certain windows are open.
※
Button labels on the remote control may differ depending
on the region.
EN
g
LiSH