LG AG-S250 - Manual (Page 3)

FEATURES
■ AG-S230/S250/S270 are 3D glasses using RF(2.4GHz) wireless communication.
■ If the device is connected to the TV or PROJECTOR that supports the RF glasses, you can enjoy the vivid
3D images.
■ You can enjoy movies or pictures made as 3D.
ACCESSORIES
PART NAMES
USING 3D GLASSES
Button Operation LED Indication
Power On Press the Power button once. The red LED blinks once.
Power Off
Press and hold down the Power button (2 second
~3 second)
The red LED blinks three times.
Auto Off* 1 The device is automatically switched off if there is
no 3D signal for more than one minute.
The red LED blinks three times.
Battery
(Lithium polymer)
discharge
-
If the battery is discharged, the LED blinks for 1
minute and turns off automatically.
* When charging is completed, the LED is lit green.
How to connect the
glasses
-
W h e n i n i t i a l l y s w i tc h e d o n , t h e d e v i c e w i l l
a u t o m a t i c a l l y b e c o n n e c t e d t o t h e T V o r
PROJECTOR with the strongest signal.
How to re-connect the
glasses* 2 Press the power button for over eight seconds.
Release the button when the green LED light
turns on. Then, you will see the green light blink
three times before the device is switched off. If
you switch the power on again, the glasses will
be connected to the TV or PROJECTOR with the
strongest signal.
3
ENGLISH
!
NOTE ▶ The accessories represented in this manual may differ from the actual appearances.
3D Glasses 8-pin mini USB
cable
Manual CD Quick Start
Guide
Pouches
3D Glasses’ Lenses
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
3D Glasses’ Lenses
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
3D Glasses’
Lenses
Power Button
LED indicator
USB port (charging port)
8-pin mini USB cable
AG-S230 (For Children) AG-S250 (For Audlts) AG-S270 (Made of Metal)
*1 The Auto Off function automatically switches the power off when the glasses lose signal from the TV or the PROJECTOR.
This may occur when the distance or angle between the device and the TV or PROJECTOR are out of range; when there is a barrier
between the two devices; or when the device is switched from 3D to 2D mode.
The device recognizes the unique ID of the TV or PROJECTOR to which it is connected. Thus, IDs of other TVs or PROJECTORs are
not recognized by the device. If you wish to re-connect the device to other TVs or PROJECTORs, please see “How to re-connect the
glasses”. (see how to use the 3D glasses)
*2
When the device is on and there are 3D
images:
The red light blinks every second during recharge and the green light blinks every second
when fully recharged.
When the device is off or on and there are
no 3D images
Either the red or the green light stays on depending on the recharge status.
You can view 3D images with the device even while recharging it with a USB cable. During recharge, the LED light of the device indicates:
Nose Pad Nose Pad Nose Pad