LG 47LN5700 - Manual (Page 23)

ENGLISH
23 MAKING CONNECTIONS
Method A: HDMI Connection
HDMI
IN
1 (ARC)
IN
3 (MHL)
IN
2
IN
1 (ARC)
IN
3 (MHL
)
IN
2
AUDIO OUT DVI OUT
PC-AUDIO IN
COMPONENT IN / AV IN
P B P R VIDEO/ Y L/MONO AUDIO R
(*Not Provided)
PC
Choose any HDMI input port to connect.
It does not matter which port you use.
Connecting to a PC
y y It is recommended to use an HDMI connection for the best image quality.
y y Depending on the graphics card, DOS mode video may not work if a HDMI to DVI Cable is in use.
y y In PC mode, there may be noise associated with the resolution, vertical pattern, contrast or brightness. If noise
is present, change the PC output to another resolution, change the refresh rate to another rate or adjust the
brightness and contrast on the PICTURE menu until the picture is clear.
y y The synchronization input form for Horizontal and Vertical frequencies is separate.
y y Depending on the graphics card, some resolution settings may not allow the image to be positioned on the screen
properly.
y y If you are using DVI out from a PC, you have to connect analog audio separately. Refer to the instructions on the
next page.
y y When using the HDMI/DVI cable, Single link is only supported.
NOTE
HDMI Connection or DVI to HDMI Connection
Choose method A or B to make connection.