AEG COMPETENCE E4100-1 - Manual (Page 22)

Operating Instructions
22
Countdown
C
1. Press the Countdown
C button.
2. Set the desired time using the
+ or
- buttons.
3 The remaining time can be checked
by pressing the Countdown
button
C again
Press any button to switch off the
signal.
A few seconds after a Countdown
time has been set, the normal clock
display re-appears, showing the cur-
rent time.
When the Countdown is completed,
an audible signal is sounded for
5 minutes.
The maximum length of time that
can be set is 90 minutes.