Firmware auto-upgrade – ArtDio IPS-2101h User Manual
Page 22
IPS-2101h User Manual
22
9.3
Other Phone Operation
The IPS-2101h has two international standard RJ-11 phone ports which allow you connect to all
the standard phones, including traditional wireless phone and DECT wireless phone, with full
function on the phone.
10. Firmware
Auto-upgrade
If auto-upgrade function is enabled (please refer to “6.5 Other Settings”), IPS-2101h will
automatically check the designate upgrade server to see if there is new firmware ready for
download. If it does, IPS-2101h will download the firmware. After the firmware has been
verified, IPS-2101h will update the firmware. At this period, the Status Button will blink with red
and green light.
If upgrade fails, the Status Button will blink with red lights. Please reboot the IPS-2101h to
restore the setup.