Alpine KCA-420i - Manual (Page 4)

3
-EN
Installation
Velcro fastener Mounting
1
Attach the Velcro fasteners.
Attach two Velcro fasteners to the mounting
surface. The rough side should be facing the
adapter.
2
Press the adapter onto the Velcro fastener in
the mounting position.
Remove the backing to the adhesive on the Velcro
strips. Press the adapter on the mounting location.
Screw-down Mounting
1
Using the adapter as a template, hold it in the
mounting location and mark the holes to be
drilled. Before drilling, make sure that there
are no objects that could be damaged behind
the mounting surface.
2
Drill holes and secure the adapter with the
self-tapping screws (M4 x 14) supplied.
Floor
Velcro fasteners
If the iPod connection cable is damaged due to
improperly connecting the iPod, it may result in
iPod failure.
CAUTION
PRECAUTIONS
On handling the iPod™
The iPod has not been designed to withstand automotive
temperature extremes. Therefore, you should not leave the
iPod in a vehicle for extended periods. Leaving the iPod
inside a vehicle on a moderately hot or very cold day may
damage the iPod. For further details on the iPod’s non-
operating storage temperature, please consult your iPod’s
documentation.
CAUTION
• Alpine accepts no responsibility for lost data, etc.,
even if data, etc., is lost while using this product.
• Do not leave the iPod in a vehicle for a long time.
Heat and humidity may damage the iPod and you
may not be able to play it again.