Installing your da1506rt, Operation, Troubleshooting guide – Altinex Distribution Amplifier DA1506RT User Manual
Page 8: Altinex policies, 1 limited warranty/return policies, 2 contact information, Distribution amplifiers
DISTRIBUTION AMPLIFIERS
400-0016-004
7
INSTALLING YOUR DA1506RT
6
Step 1. Plug the power adapter into an AC
receptacle.
Step 2. Connect the power to the unit. The power
indicator LEDs on the front and back
panels will turn on and red. This indicates
that the unit is operational.
Step 3. Connect a VGA-type cable from a
computer to Input 2 on the amplifier’s rear
panel. The LEDs will remain red, but the
images will be present on the output
connectors.
Step 4. Connect a VGA-type cable from another
PC or laptop to Input 1 on the amplifier’s
front panel. If there is a signal present on
Input 1, then the LEDs will turn green
indicating that Input 1’s image is the
image present on the output connectors.
Step 5. Connect the output connectors of the
amplifier to your
display devices:
monitors, projectors, LCDs, etc.
Step 6. If the image is less than perfect, check all
of the connections. Poor quality cables
may often degrade the performance of the
product. Make sure that the cables used
are coaxial cables and that all pins are in
good condition.
OPERATION
7
There are no adjustments necessary to operate the
unit. The DA1506RT will operate successfully as
long as cables are attached properly and other
technical specifications are followed.
TROUBLESHOOTING GUIDE
8
We have carefully tested and found no problems in
the supplied DA1506RT; however, we would like to
offer suggestions for the following:
•
Please make sure that the input amplitude of
analog signal is less than 1.5 Vp-p.
•
Please use the ALTINEX-supplied external
adapter (9V, 500mA).
•
Please make sure that proper quality of cables is
used. We recommend ALTINEX-made cables
for best results.
•
If a problem arises after continuous usage at
higher voltage, higher temperature, higher
humidity, or at other extreme environmental
conditions, please make the necessary
adjustments for the DA1506RT to function safely
and properly.
ALTINEX POLICIES
9
9.1 LIMITED WARRANTY/RETURN POLICIES
Please see the ALTINEX website at
for details on warranty and
return policies.
9.2 CONTACT INFORMATION
ALTINEX, Inc.
592 Apollo Street
Brea, CA 92821 USA
TEL: 714 990-2300
TOLL FREE: 1-800-ALTINEX
WEB:
E-MAIL: