NewAir AC14000E User Manual
Page 10
Ionizer:
Press IONIZIER button to activate the ionizer function. This will remove harmful particles
from the air.
Error Messages:
If there is an error with the air conditioner, the LCD screen will display “E1” or “E2.” If either
of these error messages appears, please contact the manufacturer or a service center.
All of the above functions can be controlled with
the included remote.
The remote requires 2 AAA batteries.
FIG.15
Please Note:
1.
To prolong the life of the compressor, after turning off the unit, please wait at least
3 minutes before turning it back on.
2.
The cooling system will turn off if the ambient temperature is lower than the set
temperature. However, the fan will continue operating at the set level. Once the
ambient temperature rises above the set temperature, cooling will resume.
3.
The heating system will turn off if the ambient temperature is higher than the set
temperature. The ventilation fan will continue operating at the set level. Once the
ambient temperature drops below the set temperature, heating will resume.
4.
This machine is equipped with an anti-frost function. When using the heating function in
low temperatures, the heater will occasionally stop heating in order to melt any frost
that has accumulated within the air conditioner. Normal operation will resume in a few
moments.
9
K0080-1-2