Acumen Ba six Plus Heart Rate Monitor - Manual (Page 6)

Basic Use Of Setting Modes
The two setting modes are accessed from the Time of Day & HR/Stopwatch modes.
•Press & hold the SET button to enter setting mode.
• Adjust blinking digits with the RESET or ALARM
buttons.
•Press RESET to increase the digits. Press ALARM
to decrease the digits. Press and hold changes
the digits fast.
•Proceed to the next setting option, with the SET button.
•To exit setting mode when finished, just press
and hold the SET button.
Note: If no button is pressed for 1 minute the watch will automatically exit the setting mode.
Setting the Clock
Start from the Time-of-Day mode.
1. Press & hold the SET button to enter the time setting mode.
2. Hour (blinking) - set using the RESET or ALARM button. Press the SET button to
proceed to the next item.
3. Minutes (blinking) - set using the RESET or ALARM button. Press the SET button
to proceed to the next item.
4. 12/24hr. time display (blinking) - set using the RESET or ALARM button. Press
the SET button to proceed to the next item.
5. Year (blinking) - set using the RESET or ALARM button. Press the SET button to
proceed to the next item.
6. Month (blinking) - set using the RESET or ALARM button. Press the SET button
to proceed to the next item.
7. Day (blinking) - set using the RESET or ALARM button. Press the SET button to
input information and proceed to Alarm settings.
8. Daily Alarm (blinking) - set on or off with the RESET or ALARM button. Press
the SET button to proceed to the next item.
Page 4 of 13
TZ
TZ
TZ
TZ
TZ
TZ
TZ
TZ
Press & Hold SET
Time/Date
Heart Rate
Time in
Target Zone
Calories
Fitness Index
Set Time
Set Target
Zone and
Exercise Factor
Clear
Workout Data
Press & Hold SET Press & Hold SET
Press MODE
Press MODE
Press MODE
Press MODE
Press MODE