Audiovox AA-RS20CS - Manual (Page 14)

3 Wire Positive Switched Door Lock/Unlock Wiring Detail
14
must be used. Refer to the Audiovox Door Lock Wiring Supplement for proper wiring of these
circuits.
ALARM SELECTABLE FEATURES
NOTE: The Alarm Selectable Features and Remote Start Selectable Features programming steps
following are based on transmitter button 1 being programmed for channel 1 and transmitter
button 2 being programmed for channel 2.
RF Programmable Features:
Feature Selection 1 Chirp 2 Chirp Default
First 1 Second Door Locks 3.5 Second Door Lock 1 Second
Second Auto Lock On Auto Lock Off Auto Lock Off
Third Auto Unlock On Auto Unlock Off Auto Unlock Off
Fourth Passive Door Locks Active Door Locks Active Door Locks
Fifth Passive Arming Active Arming Passive Arming
To Program The Alarm's Selectable Features:
NOTE: Once you've entered the program mode DO NOT allow more than 15 seconds to pass
between steps, or the programming mode will be terminated.