LG 26LG300C - Manual (Page 82)

80
APPENDIX
APPENDIX
No picture &No sound
No or poor colour
or poor picture
Poor reception on
some channels
Lines or streaks
in pictures
Horizontal/vertical bars
or picture shaking
Picture appears slowly
after switching on
A Check whether the TV is switched on.
A Try another channel. The problem may be with the broadcast.
A Is the power cord inserted correctly into the mains?
A Check your antenna direction and/or location.
A Test the mains outlet by plugging another TV into the same outlet.
A This is normal, the image is muted during the TV startup process. Please contact
your service centre, if the picture has not appeared after five minutes.
A Adjust Colour in menu option.
A Allow a sufficient distance between the TV and the VCR.
A Try another channel. The problem may be with the broadcast.
A Are the video cables installed properly?
A Activate any function to restore the brightness of the picture.
A Check for local interference such as an electrical appliance or power tool.
A Station or cable channel experiencing problems, tune to another station.
A Station signal is weak, reposition the antenna to receive weaker stations.
A Check for sources of possible interference.
A Check antenna (Change the position of the antenna).
TROUBLESHOOTING
T Th he e T TV V d do oe ess n no ott o op pe erra atte e p prro op pe errlly y..
The remote control
does not work
Power is suddenly
turned off
A Check to see if there is any object between the TV and the remote control causing
an obstruction. Ensure you are pointing the remote control directly at the TV.
A Ensure that the batteries are installed with correct polarity (+ to +, - to -).
A Install new batteries.
A Is the sleep timer set?
A Check the power control settings. Has the Power supply been interrupted.
A Is Auto sleep activated on this station?
T Th hee vviid deeo o ffu un nccttiio on n d do oeess n no ott w wo orrkk..