Avaya P330-ML-ML - Manual (Page 197)

Chapter 2 Avaya P330-ML Layer 2 CLI Commands
Avaya P330-ML Reference Guide 183
Output fields:
show snmp group
User level: supervisor
Use then show snmp group command to display SNMP groups.
The syntax for this command is:
show snmp group [<group-name>] ]
Field Description
EngineId The SNMP engine ID.
EngineBoots The number of times the SNMP engine has been started or
reinitialized.
group-name
(optional) The name of a group to display. If no group is
specified, all groups are displayed.