HP StoreEver Ultrium Tape Drives - Manual (Page 34)

Table 5 Electrical specifications, external drives
Ultrium 1840 Ultrium 960 Ultrium 460
Power consumption 13 Watts idle,
26 Watts typical,
40 Watts maximum 12 Watts idle,
30 Watts typical,
35 Watts maximum 11 Watts idle,
25 Watts typical,
38 Watts maximum
Power requirements 100–240 VAC
50-60 Hz, auto-ranging
0.7A maximum 100–240 VAC
50-60 Hz, auto-ranging
0.8A maximum 100–240 VAC
50-60 Hz, auto-ranging
0.7A maximum
1. Plug the power cable securely into the socket on the rear panel of the drive.
2. Plug the other end of the power cable into the power outlet. The power on/off switch is on the
front panel, see Figure 13 .
1 Power cable
2 Power on/off switch
Figure 13 Connecting the power cable
34 Installing an external Ultrium tape drive