HP Matrix Operating Environment Software - Manual (Page 47)

Table 13 Servers with Virtual Connect filter criteria
Servers with Virtual Connect filter criteria
The source and target servers Virtual Connect have the same
•
Portability group
• Model and generation
•
FCoE capability
•
Virtual Connect domain group
• Mezzanine card in the same mezzanine slot
•
Blade state (not running)
Best Fit
No Errors
•
Compute resources on the target blade are not greater than or equal to the values
you specified when you created or modified the logical server. These values include
Number of Cores, CPU Frequency, and Amount of Memory.
• Different network interface name and mezzanine card
•
Different storage fabric name and mezzanine card
• You are attempting to move a logical server from a physical to virtual system or a
virtual to physical system and the source logical server has never been activated on
a target of this platform type.
Acceptable Fit
Classifiable Soft Errors
Unclassifiable Soft Errors
Examples of rejected filter criteria
• Source and target server blades are not in the same Virtual Connect domain group
•
Target server blade does not have a valid enclosure
• Source and target server blades do not have the same FCoE capability
•
Target server blade is not licensed
•
Blade state is running
• Onboard Administrator authorization error
•
Blade controller fault
Rejected
Hard Errors
Valid target Datastore selection
Each available VM host includes a valid target Datastore menu selection that can be activated on
the logical server.
Figure 9 displays the Datastore menu selection.
Figure 9 Datastore menu selection
Logical server operations 47