HP Matrix Operating Environment Software - Manual (Page 70)

•
If the Planning tab is visible, click the Planning tab.
•
If the Planning tab is not visible, select Optimize
→Capacity Planning→View Planning
Scenarios... from the top menu bar.
Procedure 32 To rename a scenario
The Planning tab opens with a list of existing scenarios that you are authorized to view.
1. Click the check box preceding the scenario that you want to rename.
2. Select Modify
→Rename Planning Scenario... from the menu bar.
The Rename Scenario screen displays.
3. Modify the Name and Description fields as desired.
4. Click OK.
You are returned to the Planning tab, and the renamed scenario appears in the scenario list.
Undo/edit/review applied what-if actions in a scenario
As you work on a scenario, you can review, delete, or disable/enable selected system changes.
Prerequisites
•
You must be logged in to Matrix Operating Environment (see Accessing Capacity Advisor ).
•
You must have created the scenario (see “Creating a planning scenario” (page 65) ).
•
You must have the scenario open in the scenario editor.
Examples
The screen below illustrates some actions taken in Capacity Advisor to produce “what-if” examples
in this guide.
70 Procedures