Asante Technologies Asante Hub 1016-IQ - Manual (Page 66)

Menus
Page 5-20
Field Description
❏
FCS Errors — the number of frames that failed
Cyclic Redundancy Check (CRC).
❏
Datarate Mismatch — the number of errors
where the incoming data rate is not within the
tolerance level of 10Mhz (+ or - 0.01%).
❏
Short Events — the number of data bursts,
where data is less than 10 bytes in length.
❏
Collisions —
❏
Late Collisions — the number of collisions that
occurred after the 64-byte collision window.
❏
MauJabberLockups — the number of times the
hub repeater chip goes into a lockup state.
❏
Auto Partitions — the number of times the port
was automatically partitioned in response to 31
or more continuous collisions.
❏
Bad Frames — the number of invalid frames
(including toolong, runts, misaligned, or bad FCS).
❏
Readable Octets — the total number of octets
received from valid frames.