HP ProLiant DL380 Server - Manual (Page 24)

Operations 24
2. Open the cable management arm. Note that the cable management arm can be right-mounted or
left-mounted.
Remove the hot-plug fan cage
To remove the component:
1. Power down the server (on page 21 ).
2. Remove all power:
a. Disconnect each power cord from the power source.
b. Disconnect each power cord from the server.
3. Extend or remove the server from the rack (" Extend the server from the rack " on page 21 ).
4. Remove the access panel (on page 22 ).
5. Remove the air baffle (on page 29 ).