Installation – HP Impresora HP Deskjet 340 User Manual
Page 4
English
• 2 •
INSTALLATION
1.
Make sure that the HP DeskJet 340 printer driver has
already been installed in your PC/notebook. Check
the
HP Deskjet 340 Printer User’s Guide
for
installation instructions.
2.
Attach the HP Infrared Adapter to the HP DeskJet
340 printer interface port.
3.
Place the printer within 1 m (3 ft) of the
PC/notebook.
4.
Make sure that the infrared port on the PC/notebook
is pointed directly at HP Infrared Adapter which is
connected to your printer. Move the printer if
necessary.
5.
Swivel the lens of the HP Infrared Adapter so that the
lens is pointing at the infrared port on the
PC/notebook. Make sure that the HP Infrared
Adapter is positioned within the 30
°
-wide range of
the PC’s infrared port.
6.
Turn on the printer.
7.
Install the IrDA support software. (See the next
section).
8.
Print your document. Allow some time for the printer
to process the incoming data. Processing may require
several minutes for complex documents.
Revenue by
Revenue by
C3277-90007 Iris Guide Page 2 Tuesday, October 8, 1996 9:49 AM