HP StorageWorks 1500cs Modular Smart Array - Manual (Page 29)

HP StorageWorks Interfaz de línea de comandos de HP StorageWorks Modular Smart Array 1000/1500 - guía de usuario 29
Opciones de comando
controlador
: indica el Controlador al introducir this_controller, other_controller,
controller=1
o controller=2.
reset
: restaura la última ruta configurada de forma explícita para los LUN especificados.
lista_unidades
: indica los LUN que se establecerán al introducir all, el número de unidad para
un LUN específico o un intervalo de números de unidad.
Comando y respuesta de ejemplo
CLI> set preferred_path this_controller 0-9
SetPreferredPath start... change_map=0x2FF, lun_to_ctlr_map=0x3FF
POST_Do_Msg: 67 CACHE HARDWARE TEMPORARILY DISABLED
Quiescing host I/O for LUN map 0xFFEFF...
Host/proxy I/O quiesced...
Quiescing host I/O for LUN map 0xFFF00100...
Host/proxy I/O quiesced...
Quiescing cache flush task...
Quiescing background I/O...
Background quiesced...
Flipping ownership(s)... change_map=0x2FF, lun_to_ctlr_map=0x3FF
POST_Do_Msg: 41 REDUNDANCY ACTIVE ACTIVE CONTROLLER
Preferred path for unit 0 is now controller 1 (this_controller)
Preferred path for unit 1 is now controller 1 (this_controller)
Preferred path for unit 2 is now controller 1 (this_controller)
Preferred path for unit 3 is now controller 1 (this_controller)
Preferred path for unit 4 is now controller 1 (this_controller)
Preferred path for unit 5 is now controller 1 (this_controller)
Preferred path for unit 6 is now controller 1 (this_controller)
Preferred path for unit 7 is now controller 1 (this_controller)
Preferred path for unit 9 is now controller 1 (this_controller)
Resuming I/O...
I/O Resumed...
POST_Do_Msg: 65 CACHE HARDWARE ENABLED