When to use this scenario, Deploying an isp – HP Integrity rx4640 Server User Manual
Page 43
Deploying Integrity Support Packs in Microsoft Windows
Scenario 3: Command Line Deployment on Multiple-Target Systems Using the
Remote Deployment Console Utility
IMPORTANT: Be sure that all components requiring configuration are configured before
deploying them.
Figure 2-19 illustrates the basic, multiple-target system deployment process with the
Remote Deployment Console Utility.
Figure 2-19: Multiple-target deployment process
When to Use This Scenario
Use the ISP deployment scenario described in this section when you:
•
Are familiar with operating system command line tools
•
Require deployment of ISPs or individual components on a few remote target systems
•
Have a need for scripting
Deploying an ISP
Deploying software on multiple-target systems with the Remote Deployment Console Utility
follows the same basic procedures outlined in the section “Scenario 2: Deploying Software on
a Single-Target System with the Remote Deployment Console Utility.”
IMPORTANT: If multiple-target server deployment requirements are for very high volumes, refer to the
section “Scenario 4: Deploying Software on Multiple-Target Systems Managed by HP Systems Insight
Manager.” Using the Remote Deployment Console Utility from the command line to deploy to multiple-
target servers is recommended only for a few target servers.
HP Integrity Support Pack and Deployment Utilities User Guide
2-33