APC UPS Network Management Card 2 AP9630 - Manual (Page 8)

4 Installation Manual
Installation in a UPS
How to install the card for different UPS models
You can install the Network Management Card in a card slot in a Smart-UPS or
Symmetra UPS.
Note: You cannot install this Network Management Card in a
Symmetra PX 250 or Symmetra PX 550 UPS.
In a Symmetra UPS that uses more than one APC management product, you
must install the APC management products in the correct order for them to
operate properly.
See “How to Install Multiple Management Cards” on page 18.
You do not need to turn off power for a Symmetra UPS.
Step 1: Turn off power (Smart-UPS)
Caution: Damage to the UPS or the Network Management Card
can result if you do not remove all AC and DC power from a
Smart-UPS.