Allied Telesis AT-2916SX/ - Manual

Allied Telesis www.alliedtelesis.com
Datasheet | Network Interface Cards
AT-2916SX
PCI Gigabit Fiber Interface Card
AT-2931SX
1000SX 32-bit PCI Gigabit
fiber interface card
Performance
Allied Telesis’ AT-2916SX is a highly reliable
32-bit PCI Gigabit fiber interface card with 9KB
jumbo frames support for network upgrade
needs.The AT-2916SX helps to boost your
Gigabit Ethernet throughput ten times to
1000Mbps. With the 1000SX fiber-optic
connection, data transmission is both secure
and faster.
In order to reduce CPU use, Allied Telesis’
AT-2916SX uses the adaptive interrupts and
ultra-deep 96KB packet buffer. Coupled with
link aggregation and load balancing, AT-2916SX
achieves the best performance of its class for
server connectivity.
High Reliability
AT-2916SX Gigabit Ethernet fiber interface card
comes with a variety of reliability features that
are designed to maintain a connection as
long as possible, including: link aggregation and
failover.
Advanced Manageability
The priority queuing and Virtual LAN features
offered by AT-2916SX can help users set-up
the network based on their own needs.The
comprehensive diagnostics and configuration
software suite provides system administrators
and engineers with a powerful tool to analyze
the interface card and check specific data.
AT-2916SX Gigabit Ethernet fiber interface card
can also support up to 64 VLANs and four
priority queues.
Key Features
Management Software
• VLAN support
• Link aggregation LACP
• Link aggregation smart switch
• Failover
Advance Properties
• Jumbo frames
• Checksum offloading
• Secured transmissions
• Adaptive interrupts
• TCP, UDP and IP checksum generation
and check
• Priority queuing
• CPU task offload
(to reduce CPU utilization level)
• Remote boot (PXE 2.1)
• Compliant with the Trade Agreement Act
• Microsoft certified drivers
• RoHS compliant
• Low-profile and standard height brackets
included
• SNMP
• IPv6
• Windows Vista
• Also can be used in PCI-x bus