HP LD4730 47-inch Micro-Bezel Video Wall Display - Manual (Page 33)

To populate the Display Name and Display Location fields using VOE:
1. In the Administrator menu list, highlight the desired display by clicking on any of the menu
columns (other than the check box). The display must not be connected to any player, but it must
have a status of Ready for Connection in the status column. Click on the Display Setting button.
Figure 3-41 Highlighting a Display to Enter Display Information
2. A Configuration dialog box appears with Display Name and Display Location fields enabled for
data entry.
Figure 3-42 Configuration Dialog
Administrator Mode 29